You, our customer, are most important to us. We listen, assess and respond to your needs, as these case studies will show. Filter stories by industry, services or products.
June 4, 2020
When every project is different, easy robot set up is key to effective laser cladding. New technology helps improve the productivity of the laser cladding process.
May 25, 2020
U.S. nonprofit organization combines its life-saving mission with modern manufacturing to help end malnutrition worldwide.
April 23, 2020
MRA’s Smart Stockyard Management System combines smart engineering and leverages the latest control and automation technologies from Rockwell Automation.
April 10, 2020
Smart manufacturing is the gateway to digital transformation. Read how a metal manufacturer looked to Rockwell Automation to help them connect disparate company divisions.
April 7, 2020
Safety compliance is critical to ensure incident free oil and gas production. A fault-tolerant safety instrumented system can help meet compliance requirements.
March 23, 2020
Training for smart manufacturing talent starts from education. Industry-Academia collaboration can facilitate the next generation of smart manufacturing talent.
March 17, 2020
This efficient solution from Harmony Enterprises fills market gap with a durable, space-saving design – and exceptional 12- to-18 month expected ROI.
February 22, 2020
Taiwan pulp molding equipment manufacturer turned to Rockwell Automation for support on improving their product competitiveness.
February 22, 2020
XYP’s Automatic Shrink Label Inserting Machines incorporate smart machine technologies from Rockwell Automation to help improve productivity and profitability.
February 5, 2020
Asytec’s seed packing machine utilises the latest automation and control technologies. It improves flexibility and reduces the requirement for manual handling.
February 5, 2020
First-of-its-kind ore handling solution puts safety first at one of the world’s largest copper and gold mines.
February 4, 2020
DT Engineering designs unique system that pushes the boundaries of independent cart technology. Achieves precise synchronization for dispensing/filling applications.
January 17, 2020
Wonderful Pistachios built a new production facility to meet demand. With a control system from Rockwell Automation, the facility produces 5.6 million pounds daily.
January 13, 2020
The logistics company is improving flexibility, safety and efficiency by moving operators from the cab to the control room.
January 9, 2020
Redesigned DuraKut dicer from Marlen is easier to use – and meets sanitary challenges and new consumer demands head-on. Features an icon-based HMI to speed training.
December 18, 2019
Innovative conveying system from MagneMotion reduces cost and improves flexibility in medical device automated assembly system.
December 11, 2019
To position automakers for greater success, 3V Automation worked with Rockwell Automation to implement the latest digital technologies for smart machines and equipment.
November 29, 2019
City of Tacoma wastewater treatment plant migrates to modern DCS and production intelligence software, gains crystal clear view into operations.
October 29, 2019
An oil-processing plant – with data collection and handling challenges in its loading ramps – employs Smartech Automation to develop a new fully integrated control solution
October 1, 2019
In multiphase plant expansion, OEM Qualtech transforms manual dairy with a completely automated process.
September 28, 2019
Scalable SIS helps the specialty chemical producer meet acceptable risk level and expand with future plant growth.
September 18, 2019
The Industrial Internet of Things (IIoT) requires rethinking how things like automobiles are made. This Korean company upgraded its control system to realize substantial benefits.
September 18, 2019
When space is tight, manufacturers need flexible storage systems that make fast pick and place a priority.
September 10, 2019
A Thailand-based biomass plant building company turned to Rockwell Automation for advice and support on improving efficiency in their power plants.
August 26, 2019
Rockwell Automation solutions help on the predictive maintenance of machines at the Oum Azza water treatment plant from Acciona Agua.
July 8, 2019
Leigh Creek Energy uses the latest process control and automation technology for syngas production.
June 22, 2019
Bosch Packaging, a global leader in providing packaging solutions in food and pharmaceutical segment, reduces the time required for machine manufacturing.
June 13, 2019
Winstone Wallboards reaps the rewards of a new smart safety solution to help grow capacity and reliability at the plaster mill.
June 4, 2019
Boral recently invested in an intelligent motor control solution to improve uptime and leverage the longevity and compliance provided by the latest motor control technology.
June 3, 2019
Data sharing revolutionises maintenance at Hydro Extrusion & Components Nenzing, where centrally controlled operational data enhances maintenance operations.
June 3, 2019
Leonardo deploys PlantPAx DCS based on its modularity and openness, coupled with Rockwell Automation experience in naval, oil & gas processing and energy applications.
May 16, 2019
AKD implemented the latest connected technologies to increase recovery, improve safety and reduce downtime.
May 10, 2019
Pet food production takes on a new level of automated technology to supply Australian pet food ingredients to the world.
May 1, 2019
Built for remote locations, this LACT unit runs on solar power and scavenge gas.
April 9, 2019
Complex and challenging control system upgrade improves reliability and optimises plant performance.
March 27, 2019
Migration to a PlantPAx distributed control system helps city increase wastewater capacity, streamline control and training, and minimize overtime.
February 28, 2019
Iscador reduces energy use and harmonics in high-RPM pharma manufacturing application.
February 25, 2019
East Coast flour mill gains unprecedented operational efficiencies, increased uptime and safety improvements by switching to advanced control platform.
February 22, 2019
Sleeman Breweries needed to meet consumer demand. With an updated process automation system, Sleeman increased production capacity by 50 percent.
February 11, 2019
Qui Long worked with Rockwell Automation to develop a new HVAC system suitable for life sciences industry – delivering higher levels of automation control and information systems.
February 11, 2019
Based on independent cart technology, new KUKA system solves assembly buffering challenges – and features extraordinary flexibility.
January 25, 2019
Automated seating system design for Adelaide Convention Centre reduces the requirement for manual handling while also providing the capability for faster changeover times.
January 18, 2019
Upgrade to legacy drive control equipment on paper machine winder helps avoid any potential for downtime while also future proofing Visy’s Tumut plant.
January 14, 2019
Faster, easier integration is now possible in this revolutionary approach to auto body assembly based on independent cart technology.
January 8, 2019
Thanks to deployment of the industry-proven PlantPAx DCS, the particulate emissions at a Romanian fossil-fuel power plant are now compliant with national targets.
January 1, 2019
Off-site support augments on-site maintenance team and helps optimize asset performance.
December 14, 2018
Sinhyung Engineering selected a single controls supplier to help meet the changing demands of its end users and create flexible, scalable machines.
December 11, 2018
Hirata developed a machine for the electric vehicle market that can help mass produce batteries.
November 30, 2018
Livetech implemented a secondary packaging line for Galbusera-Tre Marie, an Italian brand with a long history in bakery industry. Flexibility and delicacy were key.
November 14, 2018
Hanyang Packaging and Engineering used Rockwell Automation Integrated Architecture to increase productivity and keep up with market demand.
November 1, 2018
Next generation, fully integrated, single-platform control, alarming and reporting architecture delivers clear results for water-treatment company.
October 29, 2018
Bibit software solutions and Rockwell Automation Integrated Architecture made it possible for this well-known coffee producer to obtain important food safety certification.
October 17, 2018
Rockwell Automation creates new NSF-Certified HMI for food industry. Stands up to extreme IP69K operational and wash down practices.
October 10, 2018
AFA Systems takes full advantage of robotics in monobloc cartoning solution that runs on a single control platform.
October 1, 2018
This dairy needed to increase production capacity to meet increasing consumer demand. With PlantPAx DCS, the dairy reduced energy usage and increased production.
October 1, 2018
With a turnkey serialization solution, biopharma company is creating high-quality, life-saving medicines – and surpassing current and evolving regulatory requirements.
September 28, 2018
With integrated condition monitoring and unparalleled local support, O&G producer reduced downtime of critical assets by 20 percent.
September 18, 2018
Easy to use software, best-fit hardware and clear messaging remove the need for technology know-how from operational equation.
August 28, 2018
Using advanced safety and analytics, Aagard optimizes end of line operations with integrated cartoner-case packer-palletizer system.
August 14, 2018
Jim Beam implements Model Predictive Control at Clermont, Kentucky distillery to maximize throughput while respecting equipment and process constraints.
August 6, 2018
Rockwell Automation modernises network at geothermal plant; delivering higher performance, easier diagnostics, enhanced data capture and more robust cybersecurity.
July 3, 2018
Solvent plant has realized $1 million in new monthly revenue with a modern DCS system and greater batch automation.
June 27, 2018
To increase efficiency, MCNS selected FactoryTalk VantagePoint to seamlessly integrate systems and organize, correlate and normalize disparate data.
June 8, 2018
When IT and OT meet, efficiency among processes, people and geographies increases.
June 6, 2018
Global tyre manufacturer incorporates new features in its productions systems that deliver much more flexibility in terms of tyre-size changes and product handling.
May 6, 2018
Australia's largest generator of clean renewable energy, Hydro Tasmania, develops industry leading hybrid system on Flinders Island.
April 30, 2018
Arnott’s embarked on a control and HMI system upgrade to deliver increased flexibility and agility for biscuit production.
April 20, 2018
To safeguard future production of a large-scaled gelatine manufacturing plant, an innovative risk management approach was undertaken to help identify and replace legacy equipment.
April 19, 2018
With a strong commitment to continuous improvement of current manufacturing assets, Miraka invested in a solution to optimise their milk powder process.
April 18, 2018
Using the PlantPAx DCS, ZIPPE created a high-availability and powerful batch plant within one year.
April 17, 2018
A new explosives manufacturing plant in Europe invests in the latest motor control technology from Australia.
April 16, 2018
Henshaw replaces legacy CNC system with programmable numeric control (PNC) to improve machining cell performance and flexibility.
March 19, 2018
End user achieves significant cost savings and simplified start-up.
March 1, 2018
Arkansas Steel needed to improve workforce utilization and make continuous improvements. Software from Rockwell Automation helped increase yield by at least 3 percent.
February 21, 2018
With control system upgrade, Modern Machine Tool Company achieves multifunctional performance – without full-blown CNC system.
February 8, 2018
Central States Industrial (CSI) steps up to industry and regulatory demands with robust, modular clean-in-place solution.
January 29, 2018
A new facility in the Netherlands can produce 7.5 tons of milk powder per hour.
January 12, 2018
FactoryTalk? ProductionCentre and FactoryTalk? Analytics? make transparent in real-time, what goes wrong behind the scenes.
January 9, 2018
Deyu's winding machines help customers achieve higher productivity and lower cost in battery production, and enhance the reliability and energy density.
January 7, 2018
Tomatic replaces unsupported black-box hardware & software at construction chemical company with modern, integrated, connected process control solution with Industrie 4.0 capabilities.
January 2, 2018
Connected, integrated control solution delivers greater process precision, enhanced energy management and comprehensive data-capture capabilities at Ukrainian sinter plant.
December 9, 2017
AT Equipment and Services GmbH, was tasked with the development of a precision control solution for two large permanent-magnet (PM) motors deployed in a dual-chamber shredding unit.
December 6, 2017
ECONO-PAK was approached by Lotte Wedel to develop a packaging/cartoner machine that would more easily cater for varieties in packaging formats and product counts.
November 30, 2017
Find out how Rockwell Automation works with Flexicon Corporation to help them achieve a cost-effective, flexible and customizable solution for their machine development.
November 30, 2017
Find out how Rockwell Automation worked with Central States Industrial (CSI) to help them reduce development time and cost with Micro850? controllers.
November 8, 2017
In a recent clean water treatment project in Denmark, AB Electric A/S was tasked with developing and installing a comprehensive PlantPAx-based control and monitoring solution.
November 5, 2017
Modernizing a plant in Brazil provided faster maintenance agility, better control of operating costs and gains in flexibility.
November 1, 2017
Yalong’s gearbox assembly machine meets standard requirements for integrated safety, ultimately helping end users ease compliance and reduce costs.
October 1, 2017
Bharat Forge Aluminiumtechnik provides innovative aluminium forging solutions for the automotive industry.
September 30, 2017
Agency in Monterey, California, upgrades water treatment system to improve data collection and save millions with PlantPAx DCS.
September 27, 2017
Chobani deploys the latest control and automation technology to build a new fully automated yogurt manufacturing plant.
September 26, 2017
A state of the art crushing and processing plant incorporates the latest technologies in intelligent motor control.
September 25, 2017
Find out how this global company improved energy efficiency and reporting through a single energy monitoring solution.
September 14, 2017
The Columbia Machine FL6200SW combines high-speed stretch wrap technology with a contemporary, modular and clean-design palletizer.
September 7, 2017
At Midwest Farmers Cooperative’s new ag terminal, a distributed control system enables the co-op to move grain through quickly and reach new markets.
August 31, 2017
With a standardized system enabled by PlantPAx, the modern DCS, KCC was able to improve efficiency, reduce engineering time, reduce downtime and improve maintenance.
August 29, 2017
ConnectedProduction well-manager solution helps ARC Resources maintain production levels from aging, depleting wells.
August 29, 2017
Thanks to Rockwell Automation servo drives and AC drives, Neotecman has reduced the design, installation and setup time of its hydraulic stamping equipment.
August 22, 2017
The Axon SLX high-speed shrink sleeve applicator addresses the challenges of ultra-thin film. And it relies on the latest Rockwell Automation control platform.
August 22, 2017
A global manufacturer of specialty papers and fibre-based engineered materials, wanted a new machine to connect seamlessly with a plant’s existing infrastructure.